View source for Volume table

A '''volume table''' is a chart to aid in the estimation of standing [[timber]] volume. These tables are based on volume equations and use correlations between certain aspects of a [[tree]] to estimate the volume to a degree of certainty. The [[diameter at breast height]] (DBH) and the merchantable height are used to determine the total volume. Difficulties occur when estimating the form class of the tree in question. The Mesavage and [[Girard form class]]es used to classify the trees to decide which volume table should be used. These volume tables are also based on different log rules such a Scribner, Doyle, and International {{cvt|1/4|in|adj=on}} scale.  In order to be effective, the proper form class must be selected as well as accurate DBH and height measurements.  

<!-- Full description of original image: Taper equation based on Avery, Thomas and Harold Burkhart. Forest Measurements. McGraw Hill Bur Ridge, IL. 2002 -->
{| class="wikitable" style="float:right; margin-left: 5em;"
|+ Standard Volume Table, International 1/4in Rule, Form Class 80<br>Volume by 16-ft logs (bd-ft)
|-
! DBH (in)
! 1
! 2
! 3
! 4
|-
| 10
| 39
| 63
| 80
| 
|-
| 12
| 59
| 98
| 127
| 146
|-
| 14
| 83
| 141
| 186
| 216
|-
| 16
| 112
| 190
| 256
| 305
|-
| 18
| 144
| 248
| 336
| 402
|-
| 20
| 181
| 314
| 427
| 512
|-
| 22
| 221
| 387
| 528
| 638
|-
| 24
| 266
| 469
| 644
| 773
|-
| 26
| 315
| 558
| 767
| 931
|-
| 28
| 367
| 654
| 904
| 1096
|-
| 30
| 424
| 758
| 1050
| 1272
|-
| 32
| 485
| 870
| 1213
| 1480
|-
| 34
| 550
| 989
| 1383
| 1691
|-
| 36
| 620
| 1121
| 1571
| 1922
|-
| 38
| 693
| 1256
| 1772
| 2167
|-
| 40
| 770
| 1403
| 1977
| 2432
|}

== History ==
 
In 1804, [[Heinrich Cotta]] suggested the idea of a volume table.<ref>Clark, J.F. 1902. Volume Tables and the bases on which they may be built. [[Forestry Quarterly]]. 1:6-11</ref> However, it was not carried out until 1846 when the [[Bavaria]]n Government conducted an extensive study which was used to find the volume of entire stands rather than single trees.  From this, variations grew based on variables including growth rate, species, and [[site index]].

==Fundamentals==

One of the most common ways to calculate volume of a standing tree or of a log is by using the Doyle log rule. This formula uses the small end diameter of a log (D) (in inches) along with the log length (L) (in feet) to estimate the volume of a log. The Doyle log rule on average under estimates the volume of a log. See formula below:

Doyle: Bd.Ft = <math>L\left(\frac{D-4}{4}\right)^2</math>

Combining the Doyle log rule along with the Mesavage-Girard Form-Class, and Girard Upper-Log Taper Tables gives a quality estimation of log volume on and off stem. Using these Girard's tables one can estimate not only the first log of the tree but also the logs following the butt log.

==References==
<references/>

==Sources==
* {{cite book|last1=Avery |first1=Thomas |first2=Harold |last2=Burkhart |year=2002 |title=Forest Measurements |edition=5th |publisher=[[McGraw Hill]] |location=New York}}
* USDA (2001). "Tables for Estimating Board-Foot Volume of Timber"

[[Category:Forest modelling]]