View source for Help:Sortable tables

{{short description|Help with sorting of rows in tables}}
{{About||other uses|Help:Sorting}}
{{Table help}}
{{Wikipedia how to|WP:TABLESORT|WP:SORT}}
{{Wiki markup}}
{{TOC limit|3}}

== Creating sortable tables ==
[[File:Wikipedia VisualEditor Table Properties.png|thumb|The properties panel of a table in VisualEditor allows you to mark a table as sortable.]]
Tables can be made sortable via [[client-side JavaScript]] by adding <code>class="wikitable sortable"</code> to their top line. These tables need to be properly formatted, with the correct number of cells. Additionally, you need to make sure that the headers of your column are properly indicated in the [[Help:Wiki markup|wikitext]]. For this, the <code>!</code> character is used in the table syntax.

If you are using the [[Wikipedia:VisualEditor|Visual Editor]], you can open the properties dialog of a table and select the sortable option.

=== Simple example ===
This is the wikitext of the table [[Help:Sortable tables#Example|shown]] in the first section and shows the typical way to enable table sorting:
<syntaxhighlight lang="wikitext">
{| class="wikitable sortable"
|-
! name
! data
! more data
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}
</syntaxhighlight>
The <code>!</code> indicates cells that are header cells. In order for a table to be sortable, the first row(s) of a table need to be entirely made up out of these header cells. You can learn more about the basic table syntax by taking the [[Help:Table/Introduction to tables|Introduction to tables]] for source editing.

=== Initial sort order of rows ===

When users are first presented with a table, the rows will always appear in the same order as in the wikitext. If you want a table to appear sorted by a certain column, you must sort the wikitext itself in that order. This is usually done for the first column. The VisualEditor makes it easy to move individual table columns and rows around. For info about that, and also about putting a table in initial alphabetical order see [[#initial alphabetical order|§ Initial alphabetical order]].

== Using sortable tables ==
When browsing Wikipedia you may encounter [[Help:Table|tables]] that have been made ''[[Help:Table#Sorting|sortable]]''. A sortable table is a type of table used to allow readers to sort its data by clicking on the header cells of columns. It is identifiable by the arrows in one or more of its header cells. Typically, readers can sort data in ascending or descending order based on the values in the selected column. The first click on the header cell will sort the column’s data in ascending order, a second click of the same arrow descending order, and a third click will restore the original order of the entire table. For example; a third click causes [[List of countries by intentional homicide rate]] to reset to its original order by subregion. 

Sortable tables are particularly useful for organizing and navigating large sets of data. For example, you might have a table displaying names, dates, or numerical data. By making the table sortable, you allow readers to click on the column header to sort by, for example, alphabetical order (A–Z or Z–A) for names, chronological order for dates, or numerical order for numbers (low to high or high to low).

The actual sorting process will happen on the computer-side using [[client-side JavaScript]]. For this reason, it is ''only'' possible to use this functionality if you have JavaScript enabled in your web browser. The sorting process is also dependent on your computer and the amount of data. Sorting a very large table on a low-performance computer may take a long time.

=== Example ===
This is an example of a small sortable table:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! name
! data
! more data
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext">
{| class="wikitable sortable"
|-
! name
! data
! more data
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}
</syntaxhighlight></div>

=== Tables with complex headers ===

Tables with more complex headers than before now sort correctly. For example:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! rowspan=2 | name
! colspan=2 | data columns
|-
! data
! more data
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source''' 
<syntaxhighlight lang="wikitext" highlight="3-4">
{| class="wikitable sortable"
|-
! rowspan=2 | name
! colspan=2 | data columns
|-
! data
! more data
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}
</syntaxhighlight></div>

Using two or more header rows, the sort arrows are placed on the bottom or lowest header row by default. They can be placed a maximum of one row higher than the lowest header row by setting <code>class="sorttop"</code> at the top of the bottom header row. For example:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
{| 
|- 
|'''Default'''
{| class="wikitable sortable"
|-
! column 1
! column 2
|-
! style="text-align:left;" | 3
! style="text-align:left;" | 7
|-
| 1
| 3
|-
| 2
| 4
|}
<syntaxhighlight lang="wikitext" highlight="6-7">
{| class="wikitable sortable"
|-
! column 1
! column 2
|-
! style="text-align:left;" | 3
! style="text-align:left;" | 7
|-
| 1
| 3
|-
| 2
| 4
|}
</syntaxhighlight>
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
{| 
|- 
|'''Using <code>class="sorttop"</code>'''
{| class="wikitable sortable"
|-
! column 1
! column 2
|- class="sorttop"
! style="text-align:left;" | 3
! style="text-align:left;" | 7
|-
| 1
| 3
|-
| 2
| 4
|}
<syntaxhighlight lang="wikitext" highlight="5-7">
{| class="wikitable sortable"
|-
! column 1
! column 2
|- class="sorttop"
! style="text-align:left;" | 3
! style="text-align:left;" | 7
|-
| 1
| 3
|-
| 2
| 4
|}
</syntaxhighlight>
|}
</div>

=== Tables with merged data rows ===
{{Anchor|Tables with complex data rows}}
{{Further|Help:Tables#Colspan and rowspan|Wikipedia:Manual of Style/Accessibility/Data tables tutorial#Complex tables}}
:
It is possible to create tables with cells that stretch over two or more columns or rows (also known as merged cells). For columns, one uses <code>|colspan=<var>n</var> | <var>content</var></code>, whereas for rows, one uses <code>|rowspan=<var>m</var> | <var>content</var></code>. In the table code, one must ''leave out the cells that are covered by such a span''. The resulting column- and row-counting must fit. Tables can have cells spanning multiple rows, using <code>|rowspan=''n''</code>.

The number of rows must be indicated with each use of rowspan. Before any sorting can be done, the rowspan setup must be correct. The wikitext must be correct. An incorrect rowspan organization can break sorting, cause weird table formatting, move data to the wrong column, etc.

See examples below.

When sorted all the rows are filled. Tables without rowspan are much easier to maintain by less experienced editors, and by editors who are stopping by only once to edit the table.

Correct rowspan numbers and wikitext, with sorting in working order:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! name
! data
! year
|-
| cats
| 273
| 2013
|-
| dogs
| 65
| rowspan=2 | 2014
|-
| mice
| 1,649
<!--column 3 spanned by cell "2014"-->
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" line highlight="13,17">
{| class="wikitable sortable"
|-
! name
! data
! year
|-
| cats
| 273
| 2013
|-
| dogs
| 65
| rowspan=2 | 2014
|-
| mice
| 1,649
<!--column 3 spanned by cell "2014"-->
|}
</syntaxhighlight></div>

Note that, after sorting, the rowspanning cells are cut into rows and their content is repeated (the year "2014" in the example). If the original order of a table is restored by clicking a third time on the same arrow, then the cells will remain repeated and not revert to the original rowspan.

See example below. The wikitext is incorrect. Line 17 should not exist. Compare to correct table above. Result in this case is an added empty column.

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! name
! data
! year
|-
| cats
| 273
| 2013
|-
| dogs
| 65
| rowspan=2 | 2014
|-
| mice
| 1,649
|
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" line highlight="17">
{| class="wikitable sortable"
|-
! name
! data
! year
|-
| cats
| 273
| 2013
|-
| dogs
| 65
| rowspan=2 | 2014
|-
| mice
| 1,649
|
|}
</syntaxhighlight></div>

==== Online table editors and rowspan ====

There is an easy online wiki table editor here:
* [http://wikitable.eu5.org wikitable.eu5.org]

It makes it easy to edit the text and links in individual cells of a table. It is especially easy when there are no rowspans in the body of a table. See the [[Help:Sortable tables#Previous section|previous section]]. Without rowspans it is easier to change the underlying framework of a table, and move stuff around. Once the wikitext framework is simpler, the online table editor is simpler too, because you do not have to edit the wikitext as much in order to edit the table.

=== Secondary key and multi-key sorting ===
When a column contains repeated values, sorting the column should maintain the original order of rows within each subset that shares the same value. This is known as [[Stable sorting|''stable sorting'']]. As a result, multi-key sorting (sorting by primary, secondary, tertiary keys, etc.) can be achieved by sorting the least significant key first and the most significant key last. For example, to sort the table by the "Text" column and then by the "Numbers" column, you would first click on and sort by the "Numbers" column, the ''secondary key'', and then click on and sort by the "Text" column, ''primary key''.

Another method for multi-key sorting is to hold down the {{Key press|shift}} key while clicking on column headings. For instance, to sort by the "Text" column followed by the “Numbers" column, you would first click on the “Text” column heading (primary key), then hold down the {{Key press|shift}} key and click on the “Numbers" column heading (secondary key).

There can be a problem with sorting if the [[User:Endo999/GoogleTrans|Google translation gadget]] (see [[User talk:Endo999/GoogleTrans#Interference with secondary sorting in tables|discussion]]) is enabled in {{Myprefs|Gadgets|uncheck=GoogleTrans}}. It may seem like shift-click secondary sorting is not working because of the delay due to the translation popup for the name in the column head. The gadget can be turned on and off quickly, once enabled in preferences, from the "Tools" menu at the upper right of any page. There are many browser translation addons (such as Simple Translate for [https://addons.mozilla.org/en-US/firefox/addon/simple-translate Firefox], [https://microsoftedge.microsoft.com/addons/detail/simple-translate/cllnohpbfenopiakdcjmjcbaeapmkcdl Chrome], and [https://chrome.google.com/webstore/detail/simple-translate/ibplnjkanclpjokhdolnendpplpjiace Edge]) that work as well or better than the gadget.
{|class="wikitable sortable"
!Numbers!!Text!!More text
|-
|4||a||row 1
|-
|5||a||row 2
|-
|1||b||row 3
|-
|1||a||row 4
|-
|2||x||row 5
|-
|2||a||row 6
|-
|3||a||row 7
|-
|3||z||row 8
|-
|3||z||row 9
|-
|3||z||row 10
|-
|3||z||row 11
|-
|25||z||row 12
|-class=sortbottom
!Bottom!!!!
|-
|}

== Optimising tables for a narrow display ==

=== Vertical headers ===

{{See|Template:Vert header}}

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! {{vert header|stp=1|name}}
! {{vert header|stp=1|data}}
! {{vert header|stp=1|more data}}
! {{vert header|stp=1|another column}}
|-
| cats
| 273
| 53
| 1
|-
| dogs
| 65
| 8,492
| 2
|-
| mice
| 1,649
| 548
| 3
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="3-6">
{| class="wikitable sortable"
|-
! {{vert header|stp=1|name}}
! {{vert header|stp=1|data}}
! {{vert header|stp=1|more data}}
! {{vert header|stp=1|another column}}
|-
| cats
| 273
| 53
| 1
|-
| dogs
| 65
| 8,492
| 2
|-
| mice
| 1,649
| 548
| 3
|}
</syntaxhighlight></div>

{{Tl|vertical header}} also works with headers that span rows or columns (using <code>rowspan</code> and col<code>span</code>). '''Note''' that there is no vertical bar <code>|</code> between <code>rowspan=2</code> and <code><nowiki>{{vertical header}}</nowiki></code>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! rowspan=2 {{vert header|stp=1|name}}
! colspan=2 {{vert header|data columns}}
! rowspan=2 {{vert header|stp=1|another column}}
|-
! {{vert header|stp=1|data}}
! {{vert header|stp=1|more data}}
|-
| cats
| 273
| 53
| 1
|-
| dogs
| 65
| 8,492
| 2
|-
| mice
| 1,649
| 548
| 3
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="3-5,7-8">
{| class="wikitable sortable"
|-
! rowspan=2 {{vert header|stp=1|name}}
! colspan=2 {{vert header|data columns}}
! rowspan=2 {{vert header|stp=1|another column}}
|-
! {{vert header|stp=1|data}}
! {{vert header|stp=1|more data}}
|-
| cats
| 273
| 53
| 1
|-
| dogs
| 65
| 8,492
| 2
|-
| mice
| 1,649
| 548
| 3
|}
</syntaxhighlight>
</div>

== Sort under template ==
{{Tracked|T35249}}
{{t|sort under}} can be used to make the sorting arrows appear underneath the header text, which may be desirable to narrow the width of a column.

{{sort under}}
{| class="wikitable sortable sort-under"
|-
! rowspan=2 | name
! colspan=2 | data columns
|-
! data
! more data
|-
|-
| cats
| 273
| 53
|-
| dogs
| 65
| 8,492
|-
| mice
| 1,649
| 548
|}

== Restrictions and exclusions ==

Tables can only be sorted vertically by clicking on the column headers (topmost cells). When a column header is clicked, the rows of the table reorder themselves in an up-and-down manner, based on the values in that column. However, there is no functionality to sort columns horizontally by clicking on a cell in the leftmost row. Thus, the table columns will not rearrange themselves left-to-right based on their data, as sorting horizontally is not supported in typical sortable table implementations.

=== Making selected columns unsortable ===

If you want a specific column not to be sortable, specify <code>class=unsortable</code> in the attributes of its header cell. If you have a sorting row then <code>class=unsortable</code> must be in the header cell with the sorting icon. 

(When using {{tl|vert header}}, disable column sorting by omitting <code>|stp=1</code> in that template, which overrides anything placed before it.)

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source''' 
<syntaxhighlight lang="wikitext" highlight="2">
{|class="wikitable sortable"
!Numbers!! class="unsortable" |Unsortable
|-
|1||This
|-
|2||Column
|-
|3||Is
|-
|4||Unsortable
|-
|5||See?
|-
!Total: 15!!
|}
</syntaxhighlight>
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result''' {{anchor|Sortable looks}}
{|class="wikitable sortable"
!Numbers!! class="unsortable" |Unsortable
|-
|1||This
|-
|2||Column
|-
|3||Is
|-
|4||Unsortable
|-
|5||See?
|-
!Total: 15!!
|}
</div>

=== Excluding final rows from sorting ===

Sometimes it is helpful to exclude the last row of a table from the sorting process. There are two methods to achieve this.

==== Header as a footer ====
You want a repeat of the header at the bottom. You do this by using the <code>!</code> (exclamation mark) syntax for all cells in the last row of the table. This will be recognized as a footer and the row will not be part of the sorting. This footer makes it a complex table, and so scopes help accessibility via [[screen readers]]. 

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source''' 
<syntaxhighlight lang="wikitext" highlight="20-22">
{|class="wikitable sortable"
|+ Header as footer example
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|-
!scope=row| John
| Smith
| 1.85
|-
!scope=row| Ron
| Ray
| 1.89
|-
!scope=row| Mario
| Bianchi
| 1.72
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|}
</syntaxhighlight>
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{|class="wikitable sortable"
|+ Header as footer example
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|-
!scope=row| John
| Smith
| 1.85
|-
!scope=row| Ron
| Ray
| 1.89
|-
!scope=row| Mario
| Bianchi
| 1.72
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|}
</div>

This applies to all rows at the end of the table that are consecutive and fully made up out of header cells. Those rows will not sort.

==== Summation footer ====
This can be achieved using <code>class=sortbottom</code> on the desired table row (line starting with <code>|-</code>).

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="19-20">
{|class="wikitable sortable"
|+ Summation footer example
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|-
!scope=row| John
| Smith
| 1.85
|-
!scope=row| Ron
| Ray
| 1.89
|-
!scope=row| Mario
| Bianchi
| 1.72
|- class=sortbottom
!scope=row colspan=2 | Average:||1.82
|}
</syntaxhighlight>
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{|class="wikitable sortable"
|+ Summation footer example
|-
!scope=col| Name
!scope=col| Surname
!scope=col| Height
|-
!scope=row| John
| Smith
| 1.85
|-
!scope=row| Ron
| Ray
| 1.89
|-
!scope=row| Mario
| Bianchi
| 1.72
|- class=sortbottom
!scope=row colspan=2 | Average:
| 1.82
|}
</div>
This is a complex table due to the "Average" cell spanning 2 columns. "Average" is also the row heading for the last row. Using the <code>!</code> (exclamation mark) syntax with <code>scope=row</code> causes the  correct header HTML to be generated, which aids in [[WP:ACCESS|accessibility]], e.g., for those using screen readers.

It is possible to keep multiple lines fixed at the bottom, as long as the lines are consecutive. 

If the "sortbottom" rows are not consecutive, then when the original order of a table is restored by clicking a third time on the same arrow then rows with <code>class=sortbottom</code> will remain at the bottom even if they were not originally at the bottom.

=== Excluding top rows from sorting ===

This works the same as above for plain (non-header) rows at the top. This can be achieved using <code>class="sorttop"</code> on the desired table row (line starting with <code>|-</code>). It is possible to keep multiple lines fixed at the top, as long as the lines are consecutive.

== Configuring the sorting ==
By default, the system tries to guess the data type in each column. It does this by looking at the first five rows and evaluating their contents. This process works most of the time but can also easily get confused if you have inconsistent values or additional specifiers that the system doesn't know about. To avoid this ambiguity you can force a particular data type or override the value of a cell. For numeric values, consider using template {{Tl|Val}}, see examples at {{Section link|Template:Val|Sorting}}.

== Forcing a column to have a particular data type ==
{{See|meta:Help:Sorting#Forcing the sort mode for a column}}

The <code>data-sort-type="..."</code> attribute can be added inside the header of a column to ensure that the cells underneath are ''all'' treated as a specified type of data. {{A note|It must go in the header cell with the sorting icon}}. It will not work in a header cell without a sorting icon. For example; when there are two rows of headers, the bottom row will always have the sorting icons, as explained previously. 

The following (case-insensitive) values are valid for <code>data-sort-type</code>:
* <code>text</code>
* <code>number</code>
* <code>currency</code>
* <code>url</code> for website addresses
* <code>IPAddress</code> for numeric [[IP address|internet protocol addresses]]
* <code>date</code> for language specific standard date format
* <code>isoDate</code> for dates in [[ISO 8601]] format (i.e. YYYY-MM-DD)
* <code>usLongDate</code> for dates in the US format of month day, year. Must have all 3 to work.
* <code>time</code>

=== data-sort-type=text ===

<code>data-sort-type=text</code> uses alphabetical sorting of text, but numbers are sorted numerically within that alphabetical sorting. See [[natural sort order]]. 

For example:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
{| class="wikitable"
|-
! Without any <code>data-sort-type</code>
|-
| <syntaxhighlight lang="wikitext">
{| class="wikitable sortable"
|-
! Album
|-
 ... etc ...
|}
</syntaxhighlight>
{| class="wikitable sortable"
|-
! Album
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|193]]''
|-
| ''[[21 (Adele album)|215]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|19]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[Matinée (album)|Matinée]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|19]]''
|-
| ''[[Everything Is New]]''
|-
| ''[[Love & War (Daniel Merriweather album)|Love & War]]''
|}
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
{| class="wikitable"
|-
!With <code>data-sort-type=text</code>
|-
| <syntaxhighlight lang="wikitext" highlight="3">
{| class="wikitable sortable"
|-
! data-sort-type=text | Album
|-
 ... etc ...
|}
</syntaxhighlight>
{| class="wikitable sortable"
|-
! data-sort-type=text | Album
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|193]]''
|-
| ''[[21 (Adele album)|215]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|19]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[Matinée (album)|Matinée]]''
|-
| ''[[21 (Adele album)|21]]''
|-
| ''[[19 (Adele album)|19]]''
|-
| ''[[Everything Is New]]''
|-
| ''[[Love & War (Daniel Merriweather album)|Love & War]]''
|}
|}
</div>

Without <code>data-sort-type=text</code> in the header, the tablesorter gets confused by the numeric titles in the first few rows into treating the entire column as numeric. This results in it wrongly sorting the non-numeric titles as zero regardless of the alphabetical ordering of their text.

Note that if a column without declared sort-type contains only numeric values within the first top five cells, ''but with a reference'' <code><nowiki><ref>...</ref></nowiki></code> immediately after the last digit of at least one number in those first five cells, this may cause the column to be sorted as text. This can be avoided by declaring a different sort type such as: <code>data-sort-type=number</code>

=== Default data type of a column ===
If you do not specify a <code>data-sort-type</code>, the sort modes (the [[data type]]s, which, in addition to the choice "ascending" or "descending", determine the sorting order) are as follows:
; date (see also below)
:* criterion: the first non-blank element is of the form "DD-MM-YYYY", "DD-MM-YY", or "DD mmm YYYY"
:* order: numeric value of YYYYMMDD; The string DDsMMsYYYY of length 10 (if characters positioned at s are equal together and are either '/' or '-' separator) is positioned as YYYYMMDD, the string DDsMMsYY of length 8 (if characters positioned at s are equal together and are either '/' or '-' separator) as 19YYMMDD if YY >= 50 and 20YYMMDD otherwise, and the string "DD mmm YYYY" with mmm an (abbreviated) month name.
; isoDate (ISO 8601)
:* criterion: format "±YYYY-MM-DD", with 1-4 digits for year "YYYY" from -9999 to 9999, month only with digits, format "±YYYY-MM-DDThh:mm:ss.sss±TH:TM" with time hour "hh", minutes "mm", seconds "ss.sss", and time zone offset "TH:TM, right values are optional.
:* order: numeric, with time in milliseconds after 01 January, 1970 UTC.
; currency (this mode can be useful for other data also)
:* criterion: the first non-blank element starts with $, £, €, or ¥
:* order: numeric, ignoring these symbols and all ordinary letters and commas, but not spaces; note that scientific notation cannot be used, as e and E are removed
; number
:* criterion: the first non-blank element consists of just digits, points, commas, spaces, "+", "-", possibly followed by "e" or "E" and a string consisting of "+", "-", digits
:* order: after removing the commas and spaces, if any, if the string starts with a number the order is numeric according to the first number in the string ([https://web.archive.org/20121226161834/www.devguru.com/technologies/ecmascript/QuickRef/parsefloat.html parseFloat] is applied); it is regarded as zero if it is empty; in other cases (parseFloat returns [[w:NaN|NaN]]), the element is positioned like -∞.
; string
:* criterion: all other cases;
:* order: uses locale specific (so in this case English) ordering if your browser supports it. Alternatively after conversion of capitals to lowercase the order is [[w:ASCII|ASCII]] – partial list showing the order: !"#$%&'()*+,-./09:;<=>?@[\]^_'az{|}~é— (see also below; a blank space comes before every other character; a [[non-breaking space]] code <code>&amp;nbsp;</code> counts as a space; two adjacent ordinary blank spaces count as one; for multiple blank spaces one can use <code>&amp;nbsp;</code> or alternate <code>&amp;nbsp;</code> and ordinary blank spaces)

If more than one possible type matches, the first type in the above order is chosen. For example, "24-12-2007" matches as a date, so is not treated as a number. Formatting and markup tags are ignored when determining the matching type.

The sort mode is determined by the first 5 non-blank rows below the header after loading the page. This can also change after deleting a row, or adding a column. Therefore, it is wise to make sure that every element matches the criterion for the required data type. Using a [[Help:Table#Row template|row template]] this can be done very conveniently.

The method of making sure the sort mode of each column is as desired, is specify a <code>data-sort-type</code>, see [[#Forcing a column to have a particular data type|above]].

== Specifying a sort key for a cell ==
Sometimes the value of a cell is not correctly parsed or one wants to sort the row in a special way. (e.g. a cell containing 'John Doe' should actually be sorted as 'Doe' and not as 'John'). This can be easily achieved by using {{tlx|sortname}}, like this:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
{|
|- 
|
 <nowiki />{|class="wikitable sortable"
 <nowiki />!Name and surname!!Height
 <nowiki />|-
 <nowiki />|<nowiki>{{sortname|John|Smith|nolink=1}}</nowiki>||1.85
 <nowiki />|-
 <nowiki />|<nowiki>{{sortname|Ian|Ray|nolink=1}}</nowiki>||1.89
 <nowiki />|-
 <nowiki />|<nowiki>{{sortname|Zachary|Bianchi|nolink=1}}</nowiki>||1.72
 <nowiki />|-
 <nowiki />!Average:||1.82
 <nowiki />|}
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{|class="wikitable sortable"
!Name and surname!!Height
|-
|{{sortname|John|Smith|nolink=1}}||1.85
|-
|{{sortname|Ian|Ray|nolink=1}}||1.89
|-
|{{sortname|Zachary|Bianchi|nolink=1}}||1.72
|-
!Average:||1.82
|}
</div>

Alternatively, you can set the <code>data-sort-value</code> attribute:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
{|
|- 
|
 <nowiki />{|class="wikitable sortable"
 <nowiki />!Name and surname!!Height
 <nowiki />|-
 <nowiki />|<b style="color:red">data-sort-value="Smith, John"</b>|John Smith||1.85
 <nowiki />|-
 <nowiki />|<b style="color:red">data-sort-value="Ray, Ian"</b>|Ian Ray||1.89
 <nowiki />|-
 <nowiki />|<b style="color:red">data-sort-value="Bianchi, Zachary"</b>|Zachary Bianchi||1.72
 <nowiki />|-
 <nowiki />!Average:||1.82
 <nowiki />|}
|}
</div>

For example, this is handy to sort military ranks in rank-seniority order:

'''Wiki markup'''

 <nowiki>{|class="wikitable sortable"</nowiki>
 !Name and surname!!Rank
 |-
 |<b style="color:red">data-sort-value="Smith, John"</b>|John Smith||<b style="color:blue">data-sort-value="16"</b>|<nowiki>[[Corporal|Cpl]]</nowiki>
 |-
 |<b style="color:red">data-sort-value="Ray, Ian"</b>|Ian Ray||<b style="color:blue">data-sort-value="8"</b>|<nowiki>[[Captain (OF-2)|Capt]]</nowiki>
 |-
 |<b style="color:red">data-sort-value="Bianchi, Zachary"</b>|Zachary Bianchi||<b style="color:blue">data-sort-value="10"</b>|<nowiki>[[2nd Lieutenant|2 Lt]]</nowiki>
 |}

This gives:

{|class="wikitable sortable"
!Name and surname!!Rank
|-
|data-sort-value="Smith, John"|John Smith||data-sort-value="16"|[[Corporal|Cpl]]
|-
|data-sort-value="Ray, Ian"|Ian Ray||data-sort-value="8"|[[Captain (OF-2)|Capt]]
|-
|data-sort-value="Bianchi, Zachary"|Zachary Bianchi||data-sort-value="10"|[[2nd Lieutenant|2 Lt]]
|-
|}

See also [[mw:Help:Sorting#Specifying a sort key]].

'''If you have a list where all the entries start with quotes ("),''' and you want to set a sort key for one of the entries, then you will need to use the [http://www.ascii.cl/htmlcodes.htm HTML name or number] for quotes at the beginning of that sort key (see also {{section link|List of XML and HTML character entity references|Character entity references in HTML}}). Lists of song titles for example sometimes have each song title in quotes. So to sort by a particular word in a song title use one of these:

<code style="font-weight:bold;">data-sort-value="&amp;quot;WORD"</code>

<code style="font-weight:bold;">data-sort-value="&amp;#34;WORD"</code>

=== Keeping some rows together ===
<code>data-sort-value</code> can be used to keep certain rows together. The specified order of these rows is preserved. An example is to keep "South Holland" immediately after "Netherlands", whatever the sort order or column:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{|class="wikitable sortable"
!Country/province !!Capital
|-
|France ||Paris
|-
|Netherlands ||Amsterdam
|-
|data-sort-value=Netherlands |South Holland ||data-sort-value=Amsterdam |The Hague
|-
|Poland ||Warsaw
|-
|UK||London
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="8">
{|class="wikitable sortable"
!Country/province !!Capital
|-
|France ||Paris
|-
|Netherlands ||Amsterdam
|-
|data-sort-value=Netherlands |South Holland ||data-sort-value=Amsterdam |The Hague
|-
|UK||London
|}
</syntaxhighlight></div>

If you have rows that contain colspans, this might become a little difficult. You can also use the <code>class="expand-child"</code> on a row; it will then always be below the row just above it in the table source, wherever that row may be sorted in the table.

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
!style="width:9.3em" |Country !!Capital
|-
|'''France'''
|Paris
|- class="expand-child"
| colspan="2" | In Paris is the Eiffel Tower.
|-
|'''UK'''
|London
|- class="expand-child"
| colspan="2" | In the U.K. you cannot pay with euros,
|- class="expand-child"
| colspan="2" | and you drive on the left.
|-
|'''Germany'''
|Berlin
|- class="expand-child"
|colspan="2" | Germany includes the former DDR.
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="6,11,13,18">
{| class="wikitable sortable"
!style="width:9.3em" |Country !!Capital
|-
|'''France'''
|Paris
|- class="expand-child"
| colspan="2" | In Paris is the Eiffel Tower.
|-
|'''UK'''
|London
|- class="expand-child"
| colspan="2" | In the U.K. you cannot pay with euros,
|- class="expand-child"
| colspan="2" | and you drive on the left.
|-
|'''Germany'''
|Berlin
|- class="expand-child"
|colspan="2" | Germany includes the former DDR.
|}
</syntaxhighlight></div>

== Examples of datatype auto detection. First 5 cells in a column ==
The script sees what the first 5 cells in a column contain. The sorting mode becomes '''numeric''' if the first 5 cells contain <u>a number only</u> (comma and period used in number formatting are accepted as number). The numeric sorting order is maintained even when text is found in the cells that follow the 5th cell. 123,564,589.7e12 is in [[scientific notation]] and is treated as a number. An empty cell is treated as a non-number when sorting numerically. There is an empty cell initially at the bottom of each of the 2 tables just below. 

'''Datatype auto detection is inconsistent.''' It is '''always better to add''' a '''<code>data-sort-type</code>''' to the '''column header.''' 

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! Sort order<br>auto-detected<br>as text
|-
| 123,564,589.7e12
|-
| 9
|-
| 70
|-
| 80 <span style="color:red">approx</span>
|-
| -80
|-
| abc 80
|-
| aaa
|-
| 600
|-
| 300,000,000
|-
| 3,000,000
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! Sort order<br>auto-detected<br>as number
|-
| 123,564,589.7e12
|-
| 9
|-
| 70
|-
| -80
|-
| 600
|-
| 80 <span style="color:red">approx</span>
|-
| abc 80
|-
| aaa
|-
| 300,000,000
|-
| 3,000,000
|}
</div>

Single currency character, or single alphabetic character, does not currently change what the script determines via the first 5 cells in a column: '''Numerical order.'''

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! currencies
|-
| $ 9
|-
| $ 80
|-
| $ 70
|-
| $ 600
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! currencies
|-
| € 9
|-
| € 80
|-
| € 70
|-
| € 600
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! currencies
|-
| £ 9
|-
| £ 80
|-
| £ 70
|-
| £ 600
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! currencies
|-
| ¥ 9
|-
| ¥ 80
|-
| ¥ 70
|-
| ¥ 600
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! a
|-
| a 9
|-
| a 80
|-
| a 70
|-
| a 600
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
! e
|-
| e 9
|-
| e 80
|-
| e 70
|-
| e 600
|}
</div>

Percentage sign does not change from determination as '''numerical order.''' Number combinations with minus or divide signs within them are still detected as numbers. Their numerical ordering though is determined by the number before the minus or divide sign. 

{|
|
{| class="wikitable sortable"
! Percentage 
|-
| 7%
|-
| 2
|-
| 4
|-
| 22
|-
| 111
|}
|
{| class="wikitable sortable"
! Number combinations
|-
| 7-4
|-
| 2
|-
| 4
|-
| 22/7
|-
| 111
|}
|}

A '''plus sign''' in an '''empty cell''' among the first 5 cells breaks default numerical sorting. As does a '''plus sign after a number''' if it is in one of the first 5 cells in a column. 

{|
|- style="vertical-align:top;"
|
{| class="wikitable sortable"
! Sort order<br>auto-detected<br>as text
|-
| 400 
|-
| 40,000 
|-
| + 
|-
| 60,000 
|-
| 20,000 
|-
| 6,000 
|-
| 5,000 
|}
|
{| class="wikitable sortable"
! Sort order<br>auto-detected<br>as text
|-
| 400 
|-
| 40,000 
|-
| 300+
|-
| 60,000 
|-
| 20,000 
|-
| 6,000 
|-
| 5,000 
|}
|}

== Numerical sorting problems ==
:'''''Note:''' See the section above about datatype auto detection via the first 5 cells in a column.''

Most of these problems can now be fixed by manually specifying the sort mode of a column by putting <code>data-sort-type=number</code> in the column header. See the example tables above and below. See also [[meta:Help:Sorting#Sort modes]] and the section about forcing the sort mode of a column. 

To work '''<code>data-sort-type=number</code>''' needs to be in the '''header cell''' that '''contains the sorting icon.''' In tables with multi-row headers, the sorting icon will be in the lowest header cells. 

References <code><nowiki><ref>...</ref></nowiki></code> after a number in any cell (including the first five cells) no longer break numerical sorting. 

Text breaks default numerical sorting if it is before or after a number in one of the first 5 cells in a column. 

A colon by itself (to signify no data, for example) in one of the first 5 cells in a column breaks numerical sorting. 

Even when using <code>data-sort-type=number</code> in the column header, text in front of a number in any cell breaks numerical sorting of that cell. Text after a number is not a problem if the sort order of a column is specified by using <code>data-sort-type=number</code>.

Leading zeroes are not necessary for numerical sorting of a column. If it seems that way, then that means the column is being sorted alphabetically. Look in the first 5 cells for  anything other than numbers, and correct those cells according to these rules. Better yet, add <code>data-sort-type=number</code> to the column header. Later editing by other editors will not break numerical sorting. 

A dash, of any kind, in a blank cell in one of the first 5 cells in a column breaks default numerical sorting of a column. 

A dash in front of a number does not break numerical sorting.

Dashes are allowed anywhere in cells if <code>data-sort-type=number</code> is used in the column header.

The {{tl|N/A}} template in the first five cells of a column is inconsistent in its effect on automatic datatype detection. It is always better to specify a <code>data-sort-type</code> in the column header. 

=== c. for circa ===
{{See also|#Year, month, day. Using numbers. ISO date YYYY-MM-DD}}
"'''c.'''" ([[Wiktionary:circa|circa]], indicates "approximately") is often found in columns of numbers and dates. It often breaks sorting. The addition of <code>data-sort-type="..."</code> to the column header does not allow c. to be put in front of the number.

Using the '''{{tl|circa}}''' template fixes sorting when c. is in front of the number, but only if the '''''<code>sortable=yes</code>''''' parameter is added to the template. See: [[Template:Circa/doc/sortable]]. 
:<code><nowiki>{{circa|NUMBER|sortable=yes}}</nowiki></code>
:{{circa|NUMBER|sortable=yes}}

Alternatively, c. can be put after the number. Or it can be moved to a different column.

=== Numerical ranges ===
:'''''Note:''' Most problems are fixed by adding '''<code>data-sort-type=number</code>''' to the column header. It also prevents problems caused by later editing.''

A dash after a number no longer breaks default numerical sorting of a column. Therefore, a range (30–40) now works.

A plus sign after a number breaks default numerical sorting if it is in one of the first 5 cells in a column. 

A plus sign in an otherwise empty cell breaks default numerical sorting of a column. That is if the cell is one of the first 5 cells in the column.

You can also use 2 columns for a range if you want to sort by either the lower or upper range. If you want the upper range to sort best all cells need to be filled in with numbers. For example, you can use the same number in both the lower and upper range. You can also add a plus sign after the number in the upper range.

'''The first set of tables below do not sort correctly,''' except for the lower range which has no complicating factors. Note that '''"400+"''' and '''"400 +"''' do not sort correctly in their columns. These tables do not have <code>data-sort-type=number</code> in their column headers.

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ One column
! Estimated<br>attendance
|-
| 400 +
|-
| 40,000+
|-
| 200,000–400,000
|-
| 400,000+
|-
| 60,000–350,000
|-
| 40,000
|-
| 40,000–50,000
|-
| 20,000–100,000
|-
| 10,000–100,000
|-
| 6,000–7,000
|-
| 5,000–10,000
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ One column
! Estimated<br>attendance
|-
| 400+
|-
| 40,000+
|-
| 200,000–400,000
|-
| 400,000+
|-
| 60,000–350,000
|-
| 40,000
|-
| 40,000–50,000
|-
| 20,000–100,000
|-
| 10,000–100,000
|-
| 6,000–7,000
|-
| 5,000–10,000
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ Two columns
! colspan=2| Estimated<br>attendance
|-
! (lower) !! (upper)
|-
| 400 || 400+
|-
| 40,000 || 40,000+
|-
| 200,000 || 400,000
|-
| 400,000 || +
|-
| 60,000 || 350,000
|-
| 40,000 ||
|-
| 40,000 || 50,000
|-
| 20,000 || 100,000
|-
| 10,000 || 100,000
|-
| 6,000 || 7,000
|-
| 5,000 || 10,000
|}
</div>

'''<code>data-sort-type=number</code>''' has '''fixed the sorting in the tables below.''' Note the sorting of '''400+''' and '''400 +'''. 

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ One column
! data-sort-type=number |Estimated<br>attendance
|-
| 400 +
|-
| 40,000+
|-
| 200,000–400,000
|-
| 400,000+
|-
| 60,000–350,000
|-
| 40,000
|-
| 40,000–50,000
|-
| 20,000–100,000
|-
| 10,000–100,000
|-
| 6,000–7,000
|-
| 5,000–10,000
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ One column
! data-sort-type=number |Estimated<br>attendance
|-
| 400+
|-
| 40,000+
|-
| 200,000–400,000
|-
| 400,000+
|-
| 60,000–350,000
|-
| 40,000
|-
| 40,000–50,000
|-
| 20,000–100,000
|-
| 10,000–100,000
|-
| 6,000–7,000
|-
| 5,000–10,000
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|+ Two columns
! colspan=2| Estimated<br>attendance
|-
! data-sort-type=number |(lower) !! data-sort-type=number |(upper)
|-
| 400 || 400+
|-
| 40,000 || 40,000+
|-
| 200,000 || 400,000
|-
| 400,000 || +
|-
| 60,000 || 350,000
|-
| 40,000 ||
|-
| 40,000 || 50,000
|-
| 20,000 || 100,000
|-
| 10,000 || 100,000
|-
| 6,000 || 7,000
|-
| 5,000 || 10,000
|}
</div>

== Date sorting problems ==

The '''{{Tl|Date table sorting}}''' or '''{{tl|dts}}''' template will work with any combination of years, months, days. See example '''[[List of PC games (A)|here]].''' See template documentation and section farther down for more info. 

=== Month names ===
All sorting involving month names may fail for registered users who have changed the default language setting "en - English" at [[Special:Preferences]] (reported at [[phab:T126744]]). It affects relatively few users on the English Wikipedia and can be ignored.

=== Year only ===

Year sorting of a column works as long as the year is the first text in each cell in the column. Adding <code>data-sort-type=date</code> to the column header does not change this.

Text is OK ''after'' a year in a cell. "FY" ([[fiscal year]]), for example, should go after the year. References after the year are OK. Put "c." after the year, or use "est." after the year instead. 

A dash, of any kind, in a blank cell breaks year sorting of a column. Dashes after the year are OK.

Unlike for numerical sorting the {{tl|N/A}} template in any cell in a year column does ''not'' break year sorting of that column.

If there are problems with year sorting check for any cells in the column with text or a dash (of any kind) as the first thing in a cell. Remove that text or dash, and the column should sort correctly.

=== Year and month ===

Date sorting '''does not work''' for columns with only the year before the month (no day). 

Adding <code>data-sort-type=date</code> or <code>data-sort-type=isoDate</code> to the column header '''does not help.''' Click each column header a couple times in the tables below to see. Note the column headed <code>data-sort-type=isoDate</code> may sort correctly in some browsers, but it is not reliable.
<br>'''Year and month in numerical form (YYYY-MM) works with <code>data-sort-type=isoDate</code>''' (see relevant section farther down).

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
!style=max-width:5em |Year and month
|-
| 1999 Dec
|-
| 1999 Jan
|-
| 2004 May
|-
| 2004 Aug
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
!style=max-width:5em |Year and month
|-
| 1999 December
|-
| 1999 January
|-
| 2004 May
|-
| 2004 August
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=date | Year and month<br><small><code>data-sort-type=date</code></small>
|-
| 1999 Dec
|-
| 1999 Jan
|-
| 2004 May
|-
| 2004 Aug
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=date | Year and month<br><small><code>data-sort-type=date</code></small>
|-
| 1999 December
|-
| 1999 January
|-
| 2004 May
|-
| 2004 August
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate | Year and month<br><small><code>data-sort-type=isodate</code></small>
|-
| 1999 December
|-
| 1999 January
|-
| 2004 May
|-
| 2004 August
|}
</div>

=== Month and year ===

Date sorting '''does not work''' for columns with only the month before the year (no day). Adding '''<code>data-sort-type=date</code>''' to the column header '''does not help.''' 

{|
|- style=vertical-align:text-top;
|
{| class="wikitable sortable"
|-
! Month and year
|-
| Dec 1999
|-
| Jan 1999
|-
| May 2004
|-
| Aug 2004
|}
|
{| class="wikitable sortable"
|-
! Month and year
|-
| December 1999
|-
| January 1999
|-
| May 2004
|-
| August 2004
|}
|}

{|
|- style=vertical-align:text-top;
|
{| class="wikitable sortable"
|-
! data-sort-type=date | Month and year<br><code>data-sort-type=date</code>
|-
| Dec 1999
|-
| Jan 1999
|-
| May 2004
|-
| Aug 2004
|}
|
{| class="wikitable sortable"
|-
! data-sort-type=date | Month and year<br><code>data-sort-type=date</code>
|-
| December 1999
|-
| January 1999
|-
| May 2004
|-
| August 2004
|}
|}

=== Full dates work. Year must be on the end ===
This shows that any full date works ''without'' '''data-sort-type=date''' in the table. Month-day-year or day-month-year. If a number for a day is missing, date sorting is broken. Abbreviated months work too. The year must be on the end, and a number can not be used for the month. Either will break date sorting.

Date sorting works correctly in the first 2 tables below. Years before 100 (for example, year 99) break sorting. 

<div style="display:inline-table; vertical-align:top;"> 
{| class="wikitable sortable"
|-
! Full dates
|-
| Dec 5, 1999
|-
| Jan 7, 1999
|-
| May 14, 2004
|-
| Aug 4, 2004
|-
| 5 Dec 1999
|-
| 7 Jan 1999
|-
| 14 May 2004
|-
| 4 Aug 2004
|}
</div>

<div style="display:inline-table; vertical-align:top;"> 
{| class="wikitable sortable"
|-
! Full dates
|-
| December 5, 1999
|-
| January 7, 1999
|-
| May 14, 2004
|-
| August 4, 2004
|-
| 5 December 1999
|-
| 7 January 1999
|-
| 14 May 2004
|-
| 4 August 2004
|}
</div>

'''data-sort-type=date''' in the header for the date column allows date sorting to work for all entries not missing a day number. So it is good to add it in case editors forget day numbers for some entries. That can be fixed later. The rest of the dates will sort correctly by date. Test date sorting below. '''Some entries below are missing the day number.''' They end up at the top or bottom of the ''data-sort-type=date'' list upon sorting. The list below without ''data-sort-type=date'' does not sort by date.

The 2 tables below are identical except for the addition of '''data-sort-type=date''' to the second table. 
<syntaxhighlight lang=wikitext>
{| class="wikitable sortable"
|-
! data-sort-type=date | Full dates.<br><code>data-sort-type=date</code>
</syntaxhighlight>

<div style="display:inline-table; vertical-align:top;"> 
{| class="wikitable sortable"
|-
! Full dates.<br>A mix of formats
|-
| Dec 5, 1999
|-
| Jan 7, 1999
|-
| May 2004
|-
| Aug 4, 2004
|-
| 5 Dec 1999
|-
| 7 Jan 1999
|-
| 14 May 2004
|-
| 4 Aug 2004
|-
| December 1999
|-
| January 7, 1999
|-
| May 14, 2004
|-
| August 4, 2004
|-
| 5 December 1999
|-
| January 1999
|-
| 14 May 2004
|-
| 4 August 2004
|}
</div>

<div style="display:inline-table; vertical-align:top;"> 
{| class="wikitable sortable"
|-
! data-sort-type=date | Full dates.<br><code>data-sort-type=date</code>
|-
| Dec 5, 1999
|-
| Jan 7, 1999
|-
| May 2004
|-
| Aug 4, 2004
|-
| 5 Dec 1999
|-
| 7 Jan 1999
|-
| 14 May 2004
|-
| 4 Aug 2004
|-
| December 1999
|-
| January 7, 1999
|-
| May 14, 2004
|-
| August 4, 2004
|-
| 5 December 1999
|-
| January 1999
|-
| 14 May 2004
|-
| 4 August 2004
|}
</div>

=== Year, month, day. Using words for months ===

Sorting does not work for this date order.
:'''''data-sort-type=date'''''
:'''''data-sort-type=isoDate'''''
The addition of any '''data-sort-type''' to the column header does not help. See examples below.

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! Date
<small>no data-sort-type</small>
|-
|2007 January 5
|-
|2007 February 12
|-
|2007 March 9
|-
|2007 April 1
|-
|2007 May 23
|-
|2007 June 29
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type="date" |Date 
<small>data-sort-type=date</small>
|-
|2007 January 5
|-
|2007 February 12
|-
|2007 March 9
|-
|2007 April 1
|-
|2007 May 23
|-
|2007 June 29
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type="isoDate" |Date 
<small>data-sort-type=isoDate</small>
|-
|2007 January 5
|-
|2007 February 12
|-
|2007 March 9
|-
|2007 April 1
|-
|2007 May 23
|-
|2007 June 29
|}
</div>

=== Year, month, day. Using numbers. ISO date YYYY-MM-DD ===

See: '''[[ISO date]].''' "±YYYY-MM-DD", with 1 to 4 digits for year "YYYY" from -9999 to 9999. Year by itself is fine. As is the year followed by just the month. Some stuff after the date is allowed. Such as references after the date. To save header space you can add a tooltip to the "Date" column header instead of "year, month, day" below it. See: [[Template:Tooltip]]. Tooltips have been added to the tables in this section.

See section higher up: [[#Examples of datatype auto detection. First 5 cells in a column]]. Datatype auto detection is inconsistent. That is why ISO date sorting works best with '''''<code>data-sort-type=isoDate</code>''''' added to the column header. It also avoids problems when only one digit is used for the month or day. [[Leading zeros]] are no longer needed. All tables below have '''''<code>data-sort-type=isoDate</code>''''' added to the column headers.

Remember to leave a space in the wikitext before years that are a negative number. Otherwise, '''<code>|-</code>''' will be used as table formatting instead of '''<code>|</code>'''. 

"'''c.'''" stands for '''[[Wiktionary:circa|circa]]''' (approximately). "'''c.'''" before the date breaks sorting in the first table. Using the '''{{tl|circa}}''' template fixes sorting, but only if the '''''<code>sortable=yes</code>''''' parameter is added to the template. See: [[Template:Circa/doc/sortable]]. See: [[#c. for circa]].

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>With "'''c.'''"<br>Sorting broken.</small>
|-
| -90
|-
| c. 90
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-01<sup style="color:gray">[2]</sup>
|-
| c. 207-11<sup style="color:gray">[1]</sup>
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>"c." removed.<br>Sorting works.</small>
|-
| -90
|-
| 90
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-1<sup style="color:gray">[2]</sup>
|-
| 207-11<sup style="color:gray">[1]</sup>
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>{{tl|circa}} used.<br>Sorting works.</small>
|-
| -90
|-
| {{circa|sortable=yes|90}}
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-01<sup style="color:gray">[2]</sup>
|-
| {{circa|sortable=yes|207-11}}<sup style="color:gray">[1]</sup>
|}
</div>

<div style="display:inline-table; vertical-align:top; max-width:650px;">
<syntaxhighlight lang=wikitext>
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>{{tl|circa}} used.<br>Sorting works.</small>
|-
| -90
|-
| {{circa|sortable=yes|90}}
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-01<sup style="color:gray">[2]</sup>
|-
| {{circa|sortable=yes|207-11}}<sup style="color:gray">[1]</sup>
|}
</syntaxhighlight>
</div>

Adding BCE, CE, BC, etc. after the date does not break sorting. But [https://www.grammar-monster.com/lessons/abbreviations_AD_BC_BCE_CE.htm adding AD before the date] breaks sorting. Test additions before and after dates. Additions before the date are almost always a problem.

{|
|- style=vertical-align:text-top;
|
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>BCE added after.<br>Sorting works.</small>
|-
| -90 BCE
|-
| {{circa|sortable=yes|90}}
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-1<sup style="color:gray">[2]</sup>
|-
| {{circa|sortable=yes|207-11}}<sup style="color:gray">[1]</sup>
|}
|
{| class="wikitable sortable"
|-
! data-sort-type=isoDate |{{Tooltip|Date|Year, month, day}}<br><small>AD added before.<br>Sorting broken.</small>
|-
| -90 BCE
|-
| AD {{circa|sortable=yes|90}}
|-
| 90-7-13
|-
| 90-12-5
|-
| 1011-08-1<sup style="color:gray">[2]</sup>
|-
| {{circa|sortable=yes|207-11}}<sup style="color:gray">[1]</sup>
|}
|}

== Years BC are a problem ==

:'''''Note.''' See also the section farther down about the date table sorting template. It has additional info about dealing with negative years (BC, BCE).''

From [https://en.wikipedia.org/w/index.php?title=List_of_reported_UFO_sightings&oldid=1141129035 this version] of [[List of reported UFO sightings]]. The "Antiquity" section has a table with some hidden notes. Adapted here:

To sort the dates before AD 1000 you will need one of the following:
*<code>|data-sort-value="XXXX"</code> - Year. Use [[leading zeros]], and negative for BC.
*<code><nowiki>{{Date table sorting|X}}</nowiki></code> - Use negative for BC. See: {{tl|Date table sorting}}.
*<code><nowiki>{{circa|sortable=yes|lk=no|X}}</nowiki></code> - {{tl|circa}} is AD only. 

The date column it is referring to was pulled out of the larger table, simplified, and placed below. It is sorting correctly. Look at the wikitext to see the methods discussed in the hidden notes.

<div style="display:inline-table; vertical-align:top;">
<syntaxhighlight lang=wikitext>
{|class="wikitable sortable" 
|-
!Date
|-
|data-sort-value=-1440|c. 1440 BC
|-
|{{Date table sorting|-218}}
|-
|{{Date table sorting|-76}}
|-
|{{Date table sorting|-7}}
|-
|data-sort-value=0065|AD 65
|-
|data-sort-value=0196|AD 196
|-
|data-sort-value=0740|AD c. 740
|}
</syntaxhighlight></div>
<div style="display:inline-table; vertical-align:top;">
{|class="wikitable sortable" 
|-
!Date
|-
|data-sort-value=-1440|c. 1440 BC
|-
|{{Date table sorting|-218}}
|-
|{{Date table sorting|-76}}
|-
|{{Date table sorting|-7}}
|-
|data-sort-value=0065|AD 65
|-
|data-sort-value=0196|AD 196
|-
|data-sort-value=0740|AD c. 740
|}
</div>

== Date table sorting template. Many date formats ==
{{anchor|Date table sorting template}}
The simplest way to format sortable dates in a table is to use the '''{{tl|Date table sorting}}''' template. A redirect: '''{{tl|dts}}''' 

It can be used with many date formats mixed together. Note the many formats used '''[[List of PC games (A)|here]].''' See [[Template:Date table sorting]] for more info.

See example tables below. They all sort correctly. The wikitext for the first entry in each table in the first row is shown in the table header.

'''Note:''' None of the table columns use the <code>data-sort-type=</code> modifier. Using <code>data-sort-type=</code> can sometimes break sorting when used with the template. If you want the column to be narrower, you can use month abbreviations ('''''abbr=on''''' parameter). You can also allow the text to wrap ('''''nowrap=off''''' parameter). Use '''''format=dmy''''' or '''''format=mdy''''', etc. to control output format, if desired.

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! Date<br>(Day and month only)<br><small><code><nowiki>{{dts|4 Jan}}</nowiki></code></small>
|-
| {{dts|4 Jan}}
|-
| {{dts|28 Aug}}
|-
| {{dts|3 Jan}}
|-
| {{dts|29 Aug}}
|-
| {{dts|14 Dec}}
|-
| {{dts|1 Jan}}
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! Date<br>(Month and day only)<br><small><code><nowiki>{{dts|January 4}}</nowiki></code></small>
|-
| {{dts|January 4}}
|-
| {{dts|August 28}}
|-
| {{dts|January 3}}
|-
| {{dts|August 29}}
|-
| {{dts|December 14}}
|-
| {{dts|January 1}}
|}
</div>

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! Date<br>(Month, day, year)<br><small><code><nowiki>{{dts|1990|4|27}}</nowiki></code></small>
|-
| {{dts|1990|4|27}}
|-
| {{dts|1989|8|8}}
|-
| {{dts|2006|2|3}}
|-
| {{dts|2006|10|4}}
|-
| {{dts|2004|11|1}}
|-
| {{dts|2004|1|11}}
|}
</div>


<div style="display:inline-table; vertical-align:top;">
<syntaxhighlight lang=wikitext>
{| class="wikitable sortable"
|-
! Dates.<br>Various formats
|-
| {{dts|Jan 1980}}
|-
| {{dts|Aug 1981}}
|-
| {{dts|1992}}
|-
| {{dts|August 28 1993}}
|-
| {{dts|1990|4|27}}
|-
| {{dts|1989|8|8}}
|}
</syntaxhighlight>
</div>
<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! Dates.<br>Various formats
|-
| {{dts|Jan 1980}}
|-
| {{dts|Aug 1981}}
|-
| {{dts|1992}}
|-
| {{dts|August 28 1993}}
|-
| {{dts|1990|4|27}}
|-
| {{dts|1989|8|8}}
|}
</div>

=== Issues. Years BC, etc ===
For years BC, <code>!9937-09-23</code> can be used for -0062-09-23 (62 BC): Simply subtract the year BC from 10,000.
* See also: [[bugzilla:8226]]{{-}}

Date sorting works by formatting dates so they can be sorted numerically. For example:
* <code>'''yyyy mm dd'''</code>

or
* <code>'''2001 07 21'''</code>

...for 21 July 2001. The <code>display:none</code> style can be used to hide a sortable numeric date before the displayed date. See wikitext of table just below. Alternatively, {{tl|Date table sorting}} does this automatically, and is recommended in most cases.

{|class="wikitable sortable"
!Displayed
!What is being sorted
|-
| <span style="display:none">2006-12-03</span>2006-12-03
|2006-12-03
|-
| <span style="display:none">0000-03-27</span>0000-03-27
|0000-03-27
|-
| <span style="display:none">2006-12</span>December 2006
|2006-12
|-
| <span style="display:none">!9936-04</span>April 64 BC
|!9936-04
|-
| <span style="display:none">!9900-07-13</span>-0099-07-13
|!9900-07-13
|-
| <span style="display:none">!9937-09-23</span>-0062-09-23
|!9937-09-23
|-
| <span style="display:none">!9937-10-08</span>-0062-10-08
|!9937-10-08
|-
| <span style="display:none">!9998-12-21</span>-0001-12-21
|!9998-12-21
|-
| <span style="display:none">2006-11-08</span>2006-11-08
|2006-11-08
|-
| <span style="display:none">0304-12-31</span>0304-12-31
|0304-12-31
|-
| <span style="display:none">2005-05-15</span>2005-05-15
|2005-05-15
|}

You can use {{dts|2012-07-07}} etc. to get sortable dates. Example, including one date with a different display format:

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Rendered result'''
{| class="wikitable sortable"
|-
! Date
|-
| {{dts|2012-01-07}}
|-
| {{dts|2012-05-07}}
|-
| {{dts|4 July 2012}}  <!-- Ensure alternate display date format works -->
|-
| {{dts|2012-07-07}}
|}
</div>

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
'''Wiki source'''
<syntaxhighlight lang="wikitext" highlight="9">
{| class="wikitable sortable"
|-
! Date
|-
| {{dts|2012-01-07}}
|-
| {{dts|2012-05-07}}
|-
| {{dts|4 July 2012}}  <!-- Ensure alternate display date format works -->
|-
| {{dts|2012-07-07}}
|}
</syntaxhighlight>
</div>

== Before year 100. Any date format ==
{{collapse top|Note: This no longer seems to be working.}}

Sorting can be done via the hidden '''<code>data-sort-value</code>''' using the [[ISO date]]. Combined with '''<code>data-sort-type=isoDate</code>''' 

'''Note:''' The sorting wikitext is the same for the 2 tables below. '''Any date format can be shown to the readers.''' 

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable" 
|-
! data-sort-type=isoDate | Date
|-
| data-sort-value="111-12-05" | 5 Dec 111
|-
| data-sort-value="35-01-07" | 7 Jan 35
|-
| data-sort-value="207-12-05" | 5 Dec 207
|-
| data-sort-value="-111" | 111 BC
|-
| data-sort-value="-35-01-07" | 7 Jan 35 BC
|-
| data-sort-value="-207-12" | Dec 207 BC
|}
</div>

<div style="display:inline-table; vertical-align:top;">
<syntaxhighlight lang="wikitext">
{| class="wikitable sortable" 
|-
! data-sort-type=isoDate | Date
|-
| data-sort-value="111-12-05" | 5 Dec 111
|-
| data-sort-value="35-01-07" | 7 Jan 35
|-
| data-sort-value="207-12-05" | 5 Dec 207
|-
| data-sort-value="-111" | 111 BC
|-
| data-sort-value="-35-01-07" | 7 Jan 35 BC
|-
| data-sort-value="-207-12" | Dec 207 BC
|}
</syntaxhighlight>
</div>

The table below uses the same isoDate values for '''<code>data-sort-value</code>''' as the above table. But '''multiple formats are used for showing the dates to the reader.'''

<div style="display:inline-table; vertical-align:top;">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate | Date
|-
| data-sort-value="111-12-05" | 5 Dec 111
|-
| data-sort-value="35-01-07" | 7 January 35
|-
| data-sort-value="207-12-05" | Dec 5, 207
|-
| data-sort-value="-111" | about 111 BC
|-
| data-sort-value="-35-01-07" | Jan 7, 35 BC
|-
| data-sort-value="-207-12" | December 207 BC
|}
</div>

<div style="display:inline-table; vertical-align:top;">
<syntaxhighlight lang="wikitext">
{| class="wikitable sortable"
|-
! data-sort-type=isoDate | Date
|-
| data-sort-value="111-12-05" | 5 Dec 111
|-
| data-sort-value="35-01-07" | 7 January 35
|-
| data-sort-value="207-12-05" | Dec 5, 207
|-
| data-sort-value="-111" | about 111 BC
|-
| data-sort-value="-35-01-07" | Jan 7, 35 BC
|-
| data-sort-value="-207-12" | December 207 BC
|}
</syntaxhighlight>
</div>
{{collapse bottom}}

== Background colors in sortable headers ==

Adding color with the shorthand{{efn|Shorthand [[CSS]] properties allow several sub-properties to be set by a single property and "when values are omitted from a shorthand form, unless otherwise defined, each 'missing' sub-property is assigned its [default] value. This means that a shorthand property declaration always sets all of its sub-properties, even those that are not explicitly set. Carelessly used, this might result in inadvertently resetting some sub-properties." Certain required CSS background properties set on sortable table headers could be overruled by background rules stated on a per-table basis.<ref>{{cite web|url=https://drafts.csswg.org/css-cascade-4/#shorthand-property|title=CSS Cascading and Inheritance Level 4: Shorthand Properties|publisher=[[W3C]]|date=October 10, 2022|archive-url=https://web.archive.org/web/20221211101455/https://drafts.csswg.org/css-cascade-4/#shorthand-property|archive-date=December 11, 2022|access-date=December 19, 2022}}</ref>}} '''<code>"background:...;"</code>''' property in a header may cause that column to lose its sorting button – see [[phab:T33755]]. Example with the "Name" header:

{|class="wikitable sortable"
|-
! style="background:navajowhite" |Name!![[Surname]]!!Height
|-
|John||Smith||1.85
|-
|Ron||Ray||1.89
|-
|Mario||Bianchi||1.72
|- class="sortbottom"
|colspan="2" |Average: ||1.82
|}

<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
Use the more specific '''<code>style="background-color:...;"</code>'''<br>
to make things work correctly. Example:
<syntaxhighlight lang="wikitext" highlight="3-5">
{|class="wikitable sortable"
|-
!style="background-color:navajowhite" | Name
!style="background-color:navajowhite" | [[Surname]]
!style="background-color:navajowhite" | Height
|-
|John
|Smith
|1.85
|-
|Ron
|Ray
|1.89
|-
|Mario
|Bianchi
|1.72
|- class="sortbottom"
|colspan="2" |Average: 
|1.82
|}
</syntaxhighlight>
</div>
<div style="display:inline-table; border: 2px solid lime; padding: 0.5em;">
Produces this sortable table:
{|class="wikitable sortable"
|-
!style="background-color:navajowhite" | Name
!style="background-color:navajowhite" | [[Surname]]
!style="background-color:navajowhite" | Height
|-
|John||Smith||1.85
|-
|Ron||Ray||1.89
|-
|Mario||Bianchi||1.72
|- class="sortbottom"
|colspan="2" |Average: ||1.82
|}
</div>

== Tips and tricks ==

=== Padding ===
Sometimes entries are padded on the left for alignment purposes. This can adversely affect how they are sorted.

==== Non-breaking spaces ====
The effect of left-padding with [[non-breaking space]] codes <code>&amp;nbsp;</code> which render as blank spaces, depends on the browser: in IE they are (unlike actual blank spaces) counted for sorting as leading blank spaces, so in a list of numbers with text (for which the alphabetic sorting mode applies) they could be used to equalize the number of characters before the explicit or implicit decimal separator. However, in Firefox they are ignored for the purpose of sorting.

{|class="wikitable sortable"
!Sorting using <code>&amp;nbsp;</code> works on IE but not on Firefox
!Name
|-
|100.3 FM
|Third
|-
|&nbsp;89.5 FM
|First
|-
|107.3 FM
|Fourth
|-
|&nbsp;95.3 FM
|Second
|}

See also [[Talk:List of U.S. states and territories by population/Archive 1#Sortable Table]].

==== Padding with zeros ====
Example:
* {{padleft:{{#expr:12*13}}|6|0}}

{{mono|Formatnum}} can be combined with {{mono|padleft}}:

{{markup2
|t=Integer
|m=<syntaxhighlight lang="wikitext" inline>{{formatnum:{{padleft:299792458|16|0}}}}</syntaxhighlight> gives:
|r={{formatnum:{{padleft:299792458|16|0}}}}
}}
{{markup2
|t=Real
|m=<syntaxhighlight lang="wikitext" inline>{{formatnum:{{padleft:{{#expr:((299792458.056 - .5) round 0)}}|16|0}}}}.{{padleft:{{#expr:(1000000*(299792458.056 - ((299792458.056 - .5) round 0))) round 0}}|6|0}}</syntaxhighlight> gives:
|r={{formatnum:{{padleft:{{#expr:((299792458.056 - .5) round 0)}}|16|0}}}}.{{padleft:{{#expr:(1000000*(299792458.056 - ((299792458.056 - .5) round 0))) round 0}}|6|0}}
}}

=== Controlling sorting and display ===
Text undesired for sorting but needed for display:
* In '''numeric''' sorting mode, text breaks numerical sorting whether the text is before or after the number. Sorting then becomes alphanumeric. Empty cell is treated as "zero" when sorting numerically.
* In '''date''' sorting mode, this text needs to be put in a separate column; in the case of a cell containing a range of dates or numbers (e.g. from .. to ..), text in surplus of what is required for sorting is put in the extra column. If the first part of the text is used for sorting, then the extra column needs to be the following one; conversely, if the last part of the text is used for sorting, then the extra column needs to be the previous one; depending on the table format, this dividing of an item over two cells may look ugly.
* In '''alphabetic''' sorting, any footnotes etc. do not require a separate column; they can simply be put at the end of the element.

Text undesired for display but needed for sorting:
* can be put as hidden text in the column to be sorted

Combining the two, we can have displayed text independent of text used for sorting, by fully hiding the latter, and fully putting the former in a separate column (in date sorting mode and numeric sorting mode) or in the same column after the hidden text (in alphabetic sorting). Fully putting the displayed text in a separate column may look ugly if it is not done consistently for a whole column, but only for elements that require this (e.g. if most entries in a column are single numbers, but some are ranges).

=== Sorting with increase/decrease/steady templates ===
{| class="wikitable sortable floatright"
!Example!!Without key!!With key
|-
|Apple||{{increase}}10||{{increase|10}}10
|-
|Banana||{{increase}}2||{{increase|2}}2
|-
|Cherry||{{decrease}}1||{{decrease|-1}}1
|-
|Durian||{{steady}}||{{steady|0}}
|}
To enable sorting of cells with [[Template:Increase]], [[Template:Decrease]] or [[Template:Steady]], add a sort key, e.g. {{tlx|increase|2}}2, {{tlx|decrease|-1}}1 or {{tlx|steady|0}}. To fix an existing table, use ''Search and replace'' (right icon in the Advanced toolbar) with ''Treat search string as a regular expression'' selected to do the following replacements:
:{| class="wikitable"
!Search for!!Replace with
|-
|<code>(\{\{increase)(\}\})([0-9]*)</code>||<syntaxhighlight lang="text" inline>$1|$3$2$3</syntaxhighlight>
|-
|<code>(\{\{decrease)(\}\})([0-9]*)</code>||<syntaxhighlight lang="text" inline>$1|-$3$2$3</syntaxhighlight>
|-
|<code>(\{\{steady)(\}\})</code>||<syntaxhighlight lang="text" inline>$1|0$2</syntaxhighlight>
|}

== Maintaining tables sorted alphabetically or by rank ==

It used to be difficult to maintain tables in rank order, and to keep the numbering correct. That is no longer true. '''[[Template:Static row numbers]]''' renumbers the row numbers after every change in row order. And after every addition or deletion of rows. 

=== Putting a table in initial alphabetical order ===
<span id="initial alphabetical order"></span>
{{See|Help:Creating tables#Tables and visual editor}}
{{See also|Phab:T240114}}

There are fast and slow ways to do this. Unfortunately, the [[WP:VE|Visual Editor]] does not have a fast way to quickly alphabetize a table. You can manually move rows around one at a time. Click on a cell in a row. Then click on the arrow that shows up at the left of the row. Then click on "move above" or "move below" as needed. If this is buggy or is not working, the rows can be moved around in the wikitext by cutting and pasting rows in the wikitext. 

'''A fast way''' is to launch free '''[[w:LibreOffice Calc|LibreOffice Calc]],''' or [[List of spreadsheet software|another spreadsheet program]]. To see how go to '''[[Help:Creating tables#Sort. Spreadsheet & VE]].''' For more info see [[commons:Commons:Convert tables and charts to wiki code or image files|Commons:Convert tables and charts to wiki code or image files]]. 

'''There is another way''' to alphabetize a table, and it keeps all the styling and flag links that a spreadsheet may remove. One can use '''NoteTab Light''' (freeware version of NoteTab). But for this to work, all the wikitext for a row must be on one line. That means the cells in that row are separated by double bars {{big|'''<code><nowiki>||</nowiki></code>'''}}.

To alphabetize the list by the first column paste the table wikitext into a new NoteTab Light page. Select the rows you want to alphabetize. Then click on the "modify" menu, then "lines", then "sort", and then "ascending". That will put "A" at the top and "Z" at the bottom.

Then put back {{big|'''<code><nowiki>|-</nowiki></code>'''}} (wikitext for row) between each line. Do that via find-and-replace by replacing {{big|'''<code>^p</code>'''}} with {{big|'''<code>^p<nowiki>|</nowiki>-^p</code>'''}}

:{{big|'''<code>^p</code>'''}} is the underlying text editor code for line breaks in NoteTab.
:{{big|'''<code><nowiki>|</nowiki>-</code>'''}} is the wikitext for a table row.

If there are blank lines between the entries replace {{big|'''<code>^p^p</code>'''}} with {{big|'''<code>^p<nowiki>|</nowiki>-^p</code>'''}}

Copy the wikitext and paste it back into the article. Save the page.

=== Initial alphabetical sort versus initial sort by rank order ===

It is a good idea to keep lists and tables in some kind of initial non-random sort order. It no longer matters what method you choose. '''[[Template:Static row numbers]]''' will maintain row numbering automatically no matter what changes you make to the row order. 

==== Removing an old rank column (1,2,3) from a table ====

You can remove the rank column cells quickly. It is much easier now with the table editor in the [[VisualEditor]]. Click on the header in the column you want to delete. An arrow will show up at the top of the column. Click the arrow, and then "delete column".

Then let '''[[Template:Static row numbers]]''' create the row number column.

=== Auto-ranking or adding a row numbering column (1,2,3) ===

There are [[WP:Phabricator |Phabricator]] threads asking for a way to easily add static row numbers to tables. See '''[[phab:T42618]].''' It supersedes '''[[phab:T42634]].''' 

In the meantime there is '''[[Template:Static row numbers]].''' It is easy to use now. It is a template to automatically add row numbers to sortable tables. The row numbers will not be sorted when columns of data are sorted. A possible note to add above a table: '''''Row numbers''' are static. Other columns are sortable. This allows ranking of any column.''

See [https://en.wikipedia.org/wiki/Special:WhatLinksHere?target=Template%3AStatic+row+numbers&namespace=&hidelinks=1 list of articles] transcluding {{tlx|static row numbers}}. See [https://templatecount.toolforge.org/index.php?lang=en&namespace=10&name=static+row+numbers#bottom transclusion count].

It has some subtemplates that work with it. Go to {{tl|static row numbers}} for more details.

To see the template in use: [[List of U.S. states and territories by incarceration and correctional supervision rate]]. 

Note that '''<code>style=max-width:Xem</code>''' is selectively used to narrow columns with wordy header text without using breaks <nowiki><br></nowiki>. Header breaks annoy people using [[screen readers]] due to the pauses. 

The selective use of '''''[https://developer.mozilla.org/en-US/docs/Web/CSS/max-width max-width]''''' allows the state names to spread out, and stay on one row each if the screen is wide enough. This allows easier scanning down or across the rows. Yet when the screen becomes narrower and narrower, the state names will eventually wrap. This is good for cell phones. Use '''[[em unit]]''' settings instead of ''px''. ''Em'' units expand in width as the font size is increased. 

Be sure to check both mobile and desktop views (links at bottom of page). Check to see that header rows aren't being given a row number. Also check that the ''max-width'' settings aren't too tight. Mobile view may need a slightly larger ''max-width'' setting for some columns. And different desktop browsers, and different settings for them, can make some max-width settings cause some column header text to overlap into the adjacent column. So it is usually good to add some extra ''em'' units to the max-width settings.

== Alphabetic sorting order ==
'''<nowiki>data-sort-type:text</nowiki>''' - Sort the following table to see an example of the alphabetic sort order. 

Note that sorting is case-insensitive: the two-character entries such as A1 demonstrate that A and a are at the same position. 

{|class="wikitable sortable"
! data-sort-type:text | Test
|-
| !
|-
| "
|-
| #
|-
| $
|-
| %
|-
| &
|-
| '
|-
| (
|-
| )
|-
| *
|-
| +
|-
| ,
|-
| -
|-
| .
|-
| /
|-
| 0
|-
| 9
|-
| :
|-
| ;
|-
| <
|-
| =
|-
| >
|-
| ?
|-
| @
|-
| [
|-
| \
|-
| ]
|-
| ^
|-
| _
|-
| '
|-
| A
|-
| Z
|-
| a
|-
| z
|-
| A1
|-
| Z1
|-
| a1
|-
| z1
|-
| {
|-
| <nowiki>|</nowiki>
|-
| }
|-
| ~
|-
| —
|-
| É
|-
| é
|-
| É1
|-
| é1
|-
| †
|}

== Numerical sorting order examples ==

'''<nowiki>data-sort-type:number</nowiki>''' - Sort the following table to see an example of the numerical sort order. 

{|class="wikitable sortable"
|+ mixed notations
! data-sort-type:number | Test
|-
| {{#expr:1000000000000000000/7}}
|-
| 1000000000000000000
|-
| -1000000000000000000
|-
| .0000000000000000001
|-
| -.0000000000000000001
|-
| {{#expr:-1000000000000000000/7}}
|-
| {{#expr:.000000000001/7}}
|-
| {{#expr:-.000000000001/7}}
|-
| 89 123 456 788
|-
| 89,123,456,789
|-
| 14
|-
| -14
|-
| 11
|-
| -12 (retrograde)
|-
| 12 or 13
|-
| 12 (?)
|-
| c. 12
|-
| 12 (approx.)
|-
| ?
|-
| 333
|-
| 1e10
|-
| e 9
|-
| e 80
|-
| e 70
|-
| e 600
|-
| 999e9
|-
| 88e80
|-
| 7e270
|-
| 999e-9
|-
| 88e-80
|-
| 7e-270
|-
| -999e9
|-
| −999e9
|-
| -88e80
|-
| -7e270
|-
| -999e-9
|-
| -88e-80
|-
| -7e-270
|-
| e3
|-
| -e3
|-
| 1e3
|-
| e9
|-
| e80
|-
| e270
|-
| 6e11
|-
| 8e11
|}

== See also ==
* {{tl|Sortname}} – sorting by surname without placing first name and surname in two separate columns
* [[m:Help:Sorting]] – general help page of this functionality (Not Wikipedia specific)
* [[Help:Collapsing#Sortable tables|Sortable collapsible table]]
* {{tiw|dts}} – sorting a table by a date column, while following [[Wikipedia:Manual of Style (dates and numbers)#Dates containing a month and a day]] for display
* [[:w:Category:Sorting templates|Category:Sorting templates]] – all templates that provide functionality related to sorting.
* [[OrganicDesign:How to put zebra stripes on sortable wiki tables|How to put zebra stripes on sortable wiki tables]]
* [[Commons: Category:Table sort icons]] – useful in sorting notes (for example: [[File:sort both small.svg|10px]])

== Notes ==
{{noteslist}}

== References ==
{{reflist}}

{{Wikipedia technical help|collapsed}}
[[Category:Wikipedia tables]]