Daly detector

Type of gas-phase ion detector

This is the current revision of this page, as edited by imported>Pbsouthwood at 17:10, 6 February 2022 (Adding local short description: "Type of gas-phase ion detector", overriding Wikidata description "type of mass spectrometry detector" (Shortdesc helper)). The present address (URL) is a permanent link to this version.

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A Daly detector is a gas-phase ion detector that consists of a metal "doorknob", a scintillator (phosphor screen) and a photomultiplier.[1] It was named after its inventor Norman Richard Daly. Daly detectors are typically used in mass spectrometers.

Daly detector
Schematic of a Daly detector
InventorNorman Richard Daly
Related itemsMicrochannel plate detector
Electron multiplier

Principle of operation

Ions that hit the doorknob release secondary electrons. A high voltage (about −20000 V) between the doorknob and the scintillator accelerates the electrons onto the phosphor screen, where they are converted to photons. These photons are detected by the photomultiplier.

The advantage of the Daly detector is that the photomultiplier can be separated by a window, which lets the photons through from the high vacuum of the mass spectrometer, thus preventing an otherwise possible contamination and extending life span of the detector. The Daly detector also allows a higher acceleration after the field-free region of a time-of-flight mass spectrometer flight tube, which can improve the sensitivity for heavy ions.

Norman Richard Daly

Norman Daly was awarded 6 patents in the years 1962–1973 relating to ion detection and mass spectrometers, from his work at the United Kingdom Atomic Energy Authority.

References

  1. ^ N. R. Daly, Scintillation Type Mass Spectrometer ion Detector Archived 2012-07-17 at archive.today. Rev. Sci. Instrum. 31(3), 264–267 (1960).