Channel bank

Device that performs multiplexing or demultiplexing of communications channels

This is the current revision of this page, as edited by imported>Kvng at 15:06, 13 May 2024 (rm rmpty section). The present address (URL) is a permanent link to this version.

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

In telecommunications, a channel bank is a device that performs multiplexing or demultiplexing ("demux") of a group of communications channels, such as analog or digital telephone lines, into one channel of higher bandwidth or higher digital bit rate, such as a DS-1 (T1) circuit, so that all the channels can be sent simultaneously over a single cable called a trunk line.

File:Newbridge communications channel bank.jpg
A T1 feed demultiplexed through a Newbridge channel bank to 24 channels with an Amphenol connector

A channel bank may be located in a telephone exchange, or in an enterprise's telephone closet or enclosure where it "breaks out" individual telephone lines from a high-capacity telephone trunk line connected to the central telephone office, or the enterprise's PBX system.

See also