Module:Location map/data/São Tomé and Príncipe
| name | São Tomé and Príncipe | |||
|---|---|---|---|---|
| border coordinates | ||||
| 1.9 | ||||
| 6.2 | ←↕→ | 7.7 | ||
| -0.2 | ||||
| map center | 0°51′N 6°57′E / 0.85°N 6.95°E | |||
| image | São Tomé and Príncipe location map.svg
| |||
| ||||
| image1 | São Tomé and Príncipe physical map.svg
| |||
| ||||
Module:Location map/data/São Tomé and Príncipe is a location map definition used to overlay markers and labels on an equirectangular projection map of São Tomé and Príncipe. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.
Usage
These definitions are used by the following templates when invoked with parameter "São Tomé and Príncipe":
{{Location map|São Tomé and Príncipe |...}}{{Location map many|São Tomé and Príncipe |...}}{{Location map+|São Tomé and Príncipe |...}}{{Location map~|São Tomé and Príncipe |...}}
Map definition
name = São Tomé and Príncipe- Name used in the default map caption
image = São Tomé and Príncipe location map.svg- The default map image, without "Image:" or "File:"
image1 = São Tomé and Príncipe physical map.svg- An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters
top = 1.9- Latitude at top edge of map, in decimal degrees
bottom = -0.2- Latitude at bottom edge of map, in decimal degrees
left = 6.2- Longitude at left edge of map, in decimal degrees
right = 7.7- Longitude at right edge of map, in decimal degrees
Alternative map
The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:
- Template:Location map#Relief parameter
- Template:Location map+/relief
- Template:Location map#AlternativeMap parameter
- Template:Location map+/AlternativeMap
Precision
Longitude: from West to East this map definition covers 1.5 degrees.
- At an image width of 200 pixels, that is 0.0075 degrees per pixel.
- At an image width of 1000 pixels, that is 0.0015 degrees per pixel.
Latitude: from North to South this map definition covers 2.1 degrees.
- At an image height of 200 pixels, that is 0.0105 degrees per pixel.
- At an image height of 1000 pixels, that is 0.0021 degrees per pixel.
Examples using location map templates
Location map, using default map (image)
{{Location map | Sao Tome and Principe
| width = 200
| lat_deg = 0.34
| lon_deg = 6.68
| label = São Tomé
}}
Location map many, using relief map (image1)
{{Location map many | Sao Tome and Principe
| relief = yes
| width = 200
| caption = Locations in São Tomé and Príncipe
| lat1_deg = 0.34
| lon1_deg = 6.68
| label1 = São Tomé
| lat2_deg = 1.64
| lon2_deg = 7.42
| label2 = Santo António
| lat3_deg = -0.001
| lon3_deg = 6.522
| label3 = Ilhéu das Rolas
}}
Location map+, using AlternativeMap
{{Location map+ | Sao Tome and Principe
| AlternativeMap = São Tomé and Príncipe physical map.svg
| width = 200
| caption = Locations in São Tomé and Príncipe
| places =
{{Location map~ | Sao Tome and Principe
| lat_deg = 0.34
| lon_deg = 6.68
| label = São Tomé
}}
{{Location map~ | Sao Tome and Principe
| lat_deg = 1.64
| lon_deg = 7.42
| label = Santo António
}}
{{Location map~ | Sao Tome and Principe
| lat_deg = -0.001
| lon_deg = 6.522
| label = Ilhéu das Rolas
}}
}}
See also
Location map templates
- Template:Location map, to display one mark and label using latitude and longitude
- Template:Location map many, to display up to nine marks and labels
- Template:Location map+, to display an unlimited number of marks and labels
Creating new map definitions
return require [[Module:Location map/data/Sao Tome and Principe]]